How to install X-ray baggage scanner?

How to install X-ray baggage scanner?

X-ray baggage scanners have become part of our daily lives. It can also be seen that the importance of X-ray baggage scanner is more and more recognized by more people. But some people may not be so aware of installation steps of X-ray baggage scanner. So next we will briefly talk about X-ray baggage scanner’s installation steps.

l How to install X-ray baggage scanner?

l How to clean X-ray baggage scanner?

l Does X-ray baggage scanner need to maintain?

How to install X-ray baggage scanner?

• The installation steps for an X-ray baggage scanner are roughly as follows. However, it is best to be operated by professionals or trained personnel, so as to avoid many other accidents.

• The first step is to check whether the outer packaging of X-ray baggage scanner is damaged. If not, take out the main part of the X-ray baggage scanner first. Put the main part of the X-ray baggage scanner in the position to be installed, and then take out the industrial computer, monitor, toolbox, keyboard and mouse.

• The second step is to remove the console of X-ray baggage scanner from the wooden box. Use the key of the plastic handle in the tool box to open the back door of the console. Install the monitor first, and then connect the bellows connection line of the main body of the X-ray baggage scanner to the console, and fix it.

• Then install the industrial computer into the console of X-ray baggage scanner and connect it to the corresponding position according to the label on the line. After installation, fix the industrial computer with screws.

• Finally, plug in the power supply and insert the power-on key. Note that the emergency stop switch button at the entrance of the X-ray baggage scanner and the emergency stop switch button on the operation console should also be in the twisted state, and then press the start button to turn on.

How to clean X-ray baggage scanner?

The daily routine maintenance of X-ray baggage scanner is an important part for correct use. The correct operation of and the routine maintenance of X-ray baggage scanner can greatly extend the service life of X-ray baggage scanner and reduce the cost.

l External cleaning of X-ray baggage scanner: During the long-term operation of the X-ray baggage scanner, there will be dust and various dirt on the outer surface. In order to ensure the normal operation of the X-ray baggage scanner, it is necessary to clean the exterior regularly. A slightly damp towel is required to clean the outside of X-ray baggage scanner. Clean the cover plate and column. Please note that before cleaning the exterior of X-ray baggage scanner, you need to turn off the power of X-ray baggage scanner, as well as disconnecting the external power supply.

l Clean the photoelectric sensor of the X-ray baggage scanner: Please shut down X-ray baggage scanner and take out the key for safekeeping. Check the status of the photoelectric sensor, which is located on the inner wall of the channel inside the lead curtain. Check whether the photoelectric sensor is blocked or not, which affects the accuracy of the photoelectric sensor signal. At this time, you can use a slightly damp cotton ball to gently wipe the surface of the photoelectric sensor to improve the cleanliness of the surface.

l Clean the monitor of the X-ray baggage scanner: During the long-term operation of X-ray baggage scanner, dust or fingerprint marks will fall on the surface of the display, which will affect the clarity of the image interpreted by the operator. At this time, when the monitor is powered off, use a special monitor cleaner to clean the monitor screen and adjust its brightness.

Does X-ray baggage scanner need to maintain?

• Of course! The maintenance of X-ray baggage scanner can actually save your money, reducing costs. However, most people will underestimate the importance of maintaining X-ray baggage scanner.

• Pay attention to the internal and external removal of X-ray baggage scanner. Externally, because luggage is generally checked, X-ray baggage scanner will inevitably be dirty. You must wipe it with a wet towel or other things. But be careful not to let water in. The internal cleaning of the X-ray baggage scanner must be more careful, because it is afraid that other parts may be touched and cause malfunction. Therefore, X-ray baggage scanner is often not washed with water, but precision treatment with tools such as brushes.

• Check whether the key switches of X-ray baggage scanner are connected, and whether the emergency button is insensitive to avoid affecting subsequent normal work.

• Check that an opaque object is placed on the conveyor belt of X-ray baggage scanner, and the light can be turned on normally. After the power supply of the X-ray baggage scanner fails, wipe the cloth lens and the obstruction light cleaning glass to install on the channel.

• Check that the cooling radiator of the X-ray baggage scanner is blocked. Check and remove the dust. There are some parts that need to be checked, following the contents of the manual.

• Learn more something about X-ray baggage scanner can know how to install X-ray baggage scanner and how to clean X-ray baggage scanner. If you want to buy good X-ray baggage scanner with reasonable price, Shanghai Eastimage Equipment CO., LTD. is your best choice. Whether from quality or price, or delivery time, we can help customers to open up a further and larger market. We have all types of different X-ray baggage scanners and if you have any questions, you can contact us or search us online.