Does people screening need to maintain?

Does people screening need to maintain?

People screening is one kind of security checking metal detector, which is used for metal detector alarming. Also, people screening can make some common failures such as the false alarm, which influence the efficiency of inspection. With the purchase, installation, debugging and final use of the people screening, the whole process is more flexible to the user, but how to make people screening more efficient is a trouble for users. The maintenance of people screening can not only improve the lifespan of people screening, but also save costs.

l Does people screening need to maintain?

l How to set people screening?

l What is the standard process of people screening?

Does people screening need to maintain?

We are all familiar with people screening, which is a common inspection facility. It is widely used in aviation, subway, station and other fields.

The dirt on the surface of the people screening can be wiped with a damp cloth.

Oil stains and difficult-to-clean stains of people screening can be wiped with thinner, alcohol, or machine water.

Shut down people screening for more than 2 hours a day to prevent long-term working components from overheating and reducing performance.

Except for rain-proof people screening, other types of people screening must not be exposed to rain and must be covered with a canopy when used in the open air.

There should be no large metal objects within 1 meter around the people screening, such as large iron doors, elevators, and large iron pillars.

The installation of the people screening must be securely fixed to prevent the door from shaking due to strong wind or collision.

Keep people screening away from objects that generate magnetic fields, such as distribution boxes and electrical equipment.

How to set people screening?

People screening is one kind of security checking metal detector, which is used for metal detector alarming.

Assemble top control board with side door frame of people screening. All people screenings are designed with plug and play. You just need to drive the screw in the right position and screw it tight.

Match both side door signal wire and power wire to control board correspond plug of people screening. Do not make the wire connected in a wrong direction.

Set the whole people screening up, plug it in and power the control board on. Check if the indication light of people screening is on, if on, we could start below adjustment.

Press remote controller sub-zone button of people screening and correspond indication light will flick. It means the control board is receiving signals and working functionally.

It is time for testing people screening. Carrying small metal like keys and phones with you to pass through people screening to see if it works well. If you hear the alarm sound, then it means our metal detector door works well now.

What is standard process of people screening?

During use, please do not touch and shake the people screening, otherwise it will cause false alarm or damages. When using a people screening, the sensitivity of the detection position can be adjusted according to the detection requirements. When it is necessary to pass a metal object through people screening under the sole of the shoe without sounding an alarm, and when the sensitivity of other areas is high, just adjust the sensitivity of the first area to a lower level, and then select a larger value for the series. Then choose a smaller value for other areas.

During the safety inspection, it is forbidden for other personnel to carry metal objects through the side of the probe of people screening to generate interference signals. Safety inspectors should carefully observe the signal indicator of the people screening, and only allow the inspected personnel to pass when the signal indicator is stable. Try to avoid false alarms caused by external interference to improve the efficiency of people screening.

When the inspected personnel pass through the people screening, they should pass the queue in an orderly and quiet manner, and prohibit two or more people from passing through the people screening at the same time.

When the examinee issues an alarm through the people screening, after exiting the detection area, he should consciously enter the second detection area and cooperate with the second detection. The secondary inspection area should be set in an area that does not affect the main security inspection area.

Learn more something about people screening can know how to maintain people screening and the standard process of people screening. If you want to buy good people screening with reasonable price, Shanghai Eastimage Equipment CO., LTD. is your best choice. Whether from quality or price, or delivery time, we can help customers to open up a further and larger market. We have all types of different people screening and if you have any questions, you can contact us or search us online.