EI-VI6000 Vehicle Security Inspection System For Large Truck（High Energy）-Mobile
Product Instruction
Eastimage is an industry-leading provider of security inspection products and safety solutions. Established in 2003, the company has 50,000 square meters of independent property rights of the production base. After more than 20 years of development ，Eastimage has become a major supplier and a leading R&D and manufacturing base for security products in China.
EI-VI6000 Vehicle Security Inspection System adopts linear accelerator and new solid detector, applies dual-energy X-rays and advanced substance recogni-tion algorithm to realise fluoroscopic scanning imaging of cargo vehicles and recognition of prohibited substances. The system walks on the ground track, scanning and imaging inspection of cargo vehicles (precise mode); the system is stationary, the driver drives the vehicle through the scanning channel, the automatic avoidance of the driver's cab, and scanning and fast inspection of the cargo part (fast mode). Applicable to customs, ports, public security and logistics industries such as cargo and vehicle inspection.
Technical Features
★Adopting electron accelerator, strong penetration capability, suitable for high-density object scanning, high image resolution and good operational stability.
★Dual-mode design, one-key switching, simultaneous scanning for both fast and presice scanning mode.
★High detection efficiency, passive mode up to 120 vehicles / hour, active mode up to 20 vehicles / hour.
★Precise mode, the inspected carogo vehicles are stationary, security scanning system will move, to achieve the whole vehicle scanning.
★The use of advanced management mode, to achieve networking and centralised review operations;
★Adopt advanced algorithm and cloud image storage management to achieve intelligent inspection image analysis.
Technical parameters
Technical indicator————————Parameter
Accelerator type—————————————electronic linear accelerator
Scanning mode—————————————precise scanning,fast scanning mode
Energy————————————————6/3MeV
Steel penetration———————————350mm (scanning speed 0.4m/s); 330mm (scanning speed 7km/h)
Steel wire detection (in the air)————— 0.8mm (scanning speed 0.4m/s)； 1.2mm (scanning speed 7km/h)
Penetrating wire detection——————— 2.8mm wire visible after 100mm steel plate (scanning speed 0.4m/s);3.0mm wire visible after 100mm steel plate (scanning speed 7km/h)
Spatial resolution—————————— horizontal: 3mm (scanning speed 0.4m/s), 3.0mm (scanning speed 7km/h);45 °: 3mm (scanning speed 0.4m/s), 4.5mm (scanning speed 7km/h);vertical: 3mm (scanning speed 0.4m/s), 4.5mm (scanning speed 7km/h)
Contrast sensitivity (penetrating 100mm steel plate)— — 1.0mm (scanning speed 0.4m/s); 1.5mm (scanning speed 7km/h)
Material discrimination capability————————T3-T10 three classifications
Scanning speed——————————————7-15km/ h
Channel size————————————————5.1m (height) x 3.8m (width)
Size of the inspected vehicle (length can becustomized)————18m (length) x 2.6m (width) x 4.6m (height)
Size of ground working area—————————not more than 45m (length) x 15m (width), with shielding wall
Lifting height————————————8m
Supply voltage——————————380+10% VAC three-phase five-wire system,
Frequency—————————————50 ± 1HZ
Power————————————————45KW
Operation lemperature————————- -30C~+50℃
Storage Temperature—————————- -30C~+55C
Humidity———————————0%~95%,no condensation
System boundary dose rate——————≦2.5uSv/h
Minimum number of staff—————————2