EI-VI7000 Vehicle Security Inspection System-Mobile
Product Instruction
Eastimage is an industry-leading provider of security inspection products and safety solutions. Established in 2003, the company has50, 000 square meters of independent property rights of the production base. After more than 20 years of development，Eastimage has become a major supplier and a leading R&D and manufacturing base for security products in China. EI-VI7000 Vehicle Security Inspection System is applied to customs anti-smuggling inspection, port anti-drug inspection public security inspection and other areas.Inspection system integrated in the truck chassis, with good mobility; with the help of high-energy X-ray penetration ability, without opening the container can be inspected the goods loaded in the container,suitable for freight containers for rapid inspection, to bale to found the prohibited items in the container and the cargo centre as well as the delivery vehicle. Discover the prohibited items hidden in the container , cargo centre and delivery vehicle. It has the advantages of non-intrusiveness without opening the cantainer, high throughput, no damage to the inspected vehicle, material identification, flexible transfer deployment, compatibilty with fast inspection mode with high throughput rate and precise scanning mode, and so on
Technical Features
★High troughput , fast scanning mode can detect not less than 100 vehicles per hour, presice scanning mode can detect not less than 20 vehicles per hour.
★Advanced substance recognition function.
★Adoption of advanced algorithms and cloud image storage management to achieve intelligent review and analysis.
★The system is mobile and flexible, with strong environmental adaptability.
★Small operating space
Technical parameters
Technical indicator————————Parameter
Environmental——————————Operating temperature: -40℃～+50℃, storage ambient temperature: -50℃～+55℃ Relative humidity: 0%-99% (without condensation); Should be able to withstand wind, sand, rain, snow, salt spray; with lightning protection measures. Operating status: wind resistance not less than 7 wind; can operate under medium rain, medium snow.
Technical parameters
★Electrical power input：380±10%V AC, 3 phase; 50Hz±1%
★Continuous operation time：24 hours continuous operation can be guaranteed
★Annual effective operation rate of the system：≥98%
★Work preparation time：<30 minutes
★Workstation computer is equipped with UPS power failure protection device.
★Self-contained generator power supply, once full of tank flue, can ensure that the system can run continuously for at least 30 hours, and at the same time can still travel no less than 500 kilometres.
★Vehicles can be licensed: according to our existing vehicle management related regulations, the system vehicle can be licensed in the traffic control department.
★scanning mode: fast scanning and precise scanning; precise scanning mode: the object being scanned is stationary, the scanning system moves along the specified route; fast scanning mode: the scanning system is stationary, the driver driving the inspected vehicle through the scanning channel, shall be the driver's cab for automatic avoidance, and be able to the goods part of the complete imaging.
★The size of the inspected vehicle: not less than 18m (length) X2.5m (width) X4.6m (height).
★Inspection channel size：300mm (width) * 5000mm (height)
★Scanning height (near the source side of the X-ray)：the inspected vehicle and the container / vehicle inspection system in the same horizontal line, the scanning height of the accelerator side is not more than 0.3 metres, the detector side is not more than 0.2 metres.
★Throughput：precise scanning mode not less than 20 standard 40-foot container vehicles / hour; fast scanning mode not less than 100 standard 40-foot container vehicles / hour.
★Radiation safety indicators: annual effective radiation dose to the operator ≤ 2mSv/year; single scanning absorbed dose (on-vehicle operation work mode) ≤ 10μSv/time; single scanning absorbed dose (remote operation work mode) ≤ 50μSv/time; the maximum boundary dose rate ≤ 2.5μSv/h; the dose equivalent rate of the surroundings of the operator's operation position should be no more than 1.0μSv/h.
★Safe and controllable boundary: length not greater than 40m, and width not greater than 50m (design of infrared area alarm device).
★Scanning speed：precise scanning is not less than 0.4m/s; precise scanning speed can be set to provide three scanning modes, 24 or 12 metres/minute-36 metres/minute optional; operators choose the appropriate scanning speed according to the workload of onsite inspection; fast scanning is not less than 7km/h.
★X-ray energy: no less than 6MeV.
★Steel penetration:Active scanning mode: penetration ≥ 350mm (scanning speed: 0.4m / s);Passive scanning mode: penetration ≥ 320mm (sweep speed: 7km/h).
★Wire detection (in air):Precise scanning mode: steel wire diameter ≤1.2mm (scanning speed: 0.4m/s);Fast scanning mode: steel wire diameter ≤ 1.5mm (scanning speed: 7km/h).
★Wire detection (after steel plate):Precise scanning mode: steel wire diameter ≤4.0mm (scanning speed: 0.4m/s);Fast scanning mode: steel wire diameter ≤ 5.0mm (scanning speed: 7km / h).
★Contrast sensitivity:Active scanning mode: contrast sensitivity ≤ 1.0% (scanning speed: 0.4m/s) ;Passive scanning mode: contrast sensitivity ≤ 1.5% (scanning speed: 7km/h).
★Spatial resolution (line pair diameter):Active scanning mode: line pair diameter ≤ 3mm (scanning speed: 0.4m/s);Passive scanning mode: line pair diameter≤ 5mm (sweep speed: 7km/h).
★Material recognition function: it can distinguish organic and inorganic substances and mark them with different colour (scanning speed: 0.4m/s).Material discrimination capability:Mass thickness (g/cm²): 10≤Ti≤140 (scanning speed: 0.4m/s); (T2-T11)
★Graphite thickness (mm): 56 ≤ Ti ≤ 778 (scanning speed: 0.4m/s)
★Steel thickness (mm): 13 ≤ Ti ≤ 179 (scanning speed: 0.4m/s)
★Aluminium thickness (mm): 37 ≤ Ti ≤ 519 (scanning speed: 0.4m / s)
★Image transformation and processing: scaling, pseudo-colour transformation, inverse colour function, histogram equalisation, super enhancement, edge enhancement, suspicious marking and annotation, user-defined macro, image format conversion;
★Image scaling: 1~8X;
★Image acquisition mode: real-time, synchronous;
★Image stripping function: stripping the background objects of the selected area, so as to correctly identify the material properties of the obscured material.
★Overlapping area review function: when the scanning image is found to have the phenomenon of goods overlapping and obscuring, the overlapping area review function can be used to carry out the second scanning, so as to realise the overlapping object resolution. If it is realised by means of deflection angle, the deflection angle is not less than 15 degrees.