Product Instruction
Eastimage is an industry-leading provider of security inspection products and safety solutions. Established in 2003, the company has 50,000 square meters of independent property rights of the production base. After more than 20 years of development ，Eastimage has become a major supplier and a leading R&D and manufacturing base for security products in China.
EI-SC301 is a high-sensitivity hand-held metal detector. It can accurately detect metal guns, knives, bullets, grenades, blades and other items when used in security inspections. It can also be used for anti-theft and can detect high-purity gold and silver jewelry and chips. and other electronic components. The appearance is based on ergonomic design and is made of industrial ABS material. There are three detection sensitivity gears and three alarm modes, which can be freely adjusted according to actual needs, intelligent automatic sleep design, power saving and longer working time.
Basic Parameters：
※Dimensions:L360mmxW80mmxH41mm
※Power supply: 2 AA batteries
※Working temperature:-25℃~+60℃
※Humidity: 0~95%
Detection DIistance:
※ Pin:30~60mm;
※ Type 64 pistol:150mm;
※ Six-inch dagger:160mm
※ Diameter 20mm steel ball: 90mm
Product Features：
※ High sensitivity;
※ Convenient and simple use, no need to adjust;
※ Low electricity, can work for 40 hours continuously;
※ There are automatic continuous alarm once batteryused
※ There are voice indicator for power on and off.
※ There are switch button for sound, LED and vibration.
Replace The Battery:
※ Loosen the screw with a screwdriver to open the back cover of the battery compartment.
※ Insert No.5AA(1.5V) batteries correctly according to the positive and negative symbols in the battery box. ※ Close the battery cover lock screw.
1.Metal detection panel
2.Lanyard hole
3.Sensitivity adjustment
L: Low sensitivity；M: medium sensitivity；H: high sensitivity
4.5.6: Indicator light
Red: metal alarm;Yellow: Low power indicator, Green: Power indicator
7.Alarm mode adjustment- ring bell, mx silence,vibration
8.Power switch
9.Handle
10.Label position
11.Sensitivity adjusting hole
12.The speaker hole
13.Battery cover
Method of use：
※ Turn on the device you willhear a clicking sound, indicating that the power is on, and at the same time the green light is on.If there is no sound,it means that the battery is not installed or the battery is in poor contact. If the sound happenscontinuously, itmeans that the battery can no longer be used, and you should replace a new one.
※ Then high-sensitivity detection can be performed. Hold the handle to scan the detection surface aroundthe object. When thereis a metal object, an alarm will sound, and at the same time, the green light willchange to a redlight. If stop scanning, the alarm wil stop, and the red light changes to greenlight.
Sensitivity Adjustment：
※ lf the detection distance does not meet the specified requirements or the sensitvity is too high to causei nstability or sound when the human body is scanned without metal, the sensitivity should be adjusted.
※ Use a smal flat-blade screwdriver to penetrate thesmal hole on the detector handle and rotate it clockwise untl it has sound, and then turn it counterclockwise untl it stops make sound, and then rotate it counterclockwisefor half a turn unti the sensitivity meets the requirements.
Product Usage：
※ Electronic metal detection inspection at airports, prisons, customs, stations, terminals
※ Securityinspections at Customs, public security, border defense ※ Pharmaceutical and food business system qualityinspection
※ Important place, sports field safety inspection
※ Precious metal detection, such as gold and silver jewelry factories, electronics factories,hardware factories, warehouses, etc.
Attention：
※ Please use the specified battery and don't forget to turn off the power after use. ※ Please remove the battery when it is not applicable for a long time.
※ The device does not make a sound when it is fixed to a metal object. And it only makes a sound when it sweeps over a metal object.
※ Do not mix old and new batteries, and batteries of different types
※ Please dispose of the replaced old battery according to local regulations
Product Instruction
Eastimage is an industry-leading provider of security inspection products and safety solutions. Established in 2003, the company has 50,000 square meters of independent property rights of the production base. After more than 20 years of development ，Eastimage has become a major supplier and a leading R&D and manufacturing base for security products in China.
EI-SC301 is a high-sensitivity hand-held metal detector. It can accurately detect metal guns, knives, bullets, grenades, blades and other items when used in security inspections. It can also be used for anti-theft and can detect high-purity gold and silver jewelry and chips. and other electronic components. The appearance is based on ergonomic design and is made of industrial ABS material. There are three detection sensitivity gears and three alarm modes, which can be freely adjusted according to actual needs, intelligent automatic sleep design, power saving and longer working time.
Basic Parameters：
※Dimensions:L360mmxW80mmxH41mm
※Power supply: 2 AA batteries
※Working temperature:-25℃~+60℃
※Humidity: 0~95%
Detection DIistance:
※ Pin:30~60mm;
※ Type 64 pistol:150mm;
※ Six-inch dagger:160mm
※ Diameter 20mm steel ball: 90mm
Product Features：
※ High sensitivity;
※ Convenient and simple use, no need to adjust;
※ Low electricity, can work for 40 hours continuously;
※ There are automatic continuous alarm once batteryused
※ There are voice indicator for power on and off.
※ There are switch button for sound, LED and vibration.
Replace The Battery:
※ Loosen the screw with a screwdriver to open the back cover of the battery compartment.
※ Insert No.5AA(1.5V) batteries correctly according to the positive and negative symbols in the battery box. ※ Close the battery cover lock screw.
1.Metal detection panel
2.Lanyard hole
3.Sensitivity adjustment
L: Low sensitivity；M: medium sensitivity；H: high sensitivity
4.5.6: Indicator light
Red: metal alarm;Yellow: Low power indicator, Green: Power indicator
7.Alarm mode adjustment- ring bell, mx silence,vibration
8.Power switch
9.Handle
10.Label position
11.Sensitivity adjusting hole
12.The speaker hole
13.Battery cover
Method of use：
※ Turn on the device you willhear a clicking sound, indicating that the power is on, and at the same time the green light is on.If there is no sound,it means that the battery is not installed or the battery is in poor contact. If the sound happenscontinuously, itmeans that the battery can no longer be used, and you should replace a new one.
※ Then high-sensitivity detection can be performed. Hold the handle to scan the detection surface aroundthe object. When thereis a metal object, an alarm will sound, and at the same time, the green light willchange to a redlight. If stop scanning, the alarm wil stop, and the red light changes to greenlight.
Sensitivity Adjustment：
※ lf the detection distance does not meet the specified requirements or the sensitvity is too high to causei nstability or sound when the human body is scanned without metal, the sensitivity should be adjusted.
※ Use a smal flat-blade screwdriver to penetrate thesmal hole on the detector handle and rotate it clockwise untl it has sound, and then turn it counterclockwise untl it stops make sound, and then rotate it counterclockwisefor half a turn unti the sensitivity meets the requirements.
Product Usage：
※ Electronic metal detection inspection at airports, prisons, customs, stations, terminals
※ Securityinspections at Customs, public security, border defense ※ Pharmaceutical and food business system qualityinspection
※ Important place, sports field safety inspection
※ Precious metal detection, such as gold and silver jewelry factories, electronics factories,hardware factories, warehouses, etc.
Attention：
※ Please use the specified battery and don't forget to turn off the power after use. ※ Please remove the battery when it is not applicable for a long time.
※ The device does not make a sound when it is fixed to a metal object. And it only makes a sound when it sweeps over a metal object.
※ Do not mix old and new batteries, and batteries of different types
※ Please dispose of the replaced old battery according to local regulations
