EI-UVSS VI5000 Vehicle Security Inspection System For Large Truck（High Energy）-Mobile

EI-UVSS VI5000 Vehicle Security Inspection System For Large Truck（High Energy）-Mobile

Product Instruction

Eastimage is an industry-leading provider of security inspection products and safety solutions. Established in 2003, the company has 50,000 square meters of independent property rights of the production base. After more than 20 years of development ，Eastimage has become a major supplier and a leading R&D and manufacturing base for security products in China.

EI-UVSS VI5000 Vehicle Security Inspection System adopts electron accelerator (Betatron or Linac) and new type solid detector, applies dual-energy X-rays and advanced material recognition algorithm to realize fluoro scopic scanning imaging of cargo and vehicle and recognition of contraband, and has two scanning modes:precise inborder inspection and prison.

Technical Features

★Dual-mode design, one-key switching, simultaneous scanning for both fast and presice scanning mode.

★High detection efficiency, up to 120 vehicles/hour in fast scanning mode and up to 20 vehicles/hour in precise scanning mode.

★Precise scanning mode, the inspected goods vehicle does not move, security scanning device to move, to achieve the whole vehicle scanning.

Technical parameters

Technical indicator————————Parameter

Accelerator type——————dual-energy electronic induction accelerator (optional: single-energy Linac)

Scanning mode——————precise scanning mode,fast scanning mode

Energy——————————7.5/4MeV (optional: Linac 3MeV) 

Steel penetration—————320mm (scanning speed 0.4m/s), 

                                              300mm (scanning speed 7km/h)(single-energy Linac penetration 200mm)

Steel wire detection (45°, in the air)—————— 2.5mm (scanning speed 0.4m/s), 

                                                                                        3mm (scanning speed 7km/h)

Penetrating wire detection (penetrating100mm steel plate)———5mm wire (scanning speed 0.4m/s), 

                                                                                                          8mm wire (scanning speed 7km/h)

Spatial resolution: —————— horizontal ：3mm (scanning speed 0.4m/s), 

                                                      5mm (scanning speed 7km/h); 45 ° ：3mm (scanning speed 0.4m/s), 

            5mm (scanning speed 7km/h); vertical ：3mm (scanning speed 0.4m/s), 5mm (scanning speed 7km/h)

Contrast sensitivity————————————2mm steel visible after 100mm steel plate (scanning speed 0.4m/s); 5mm steel visible after 100mm steel plate (scanning speed 7km/h)

Material discrimination capability————T5-T9 two classifications (organic, inorganic) 

Scanning speed——————————————0.4m/s(precise mode); 7-15km/ h (fast mode) 

Channel size————————————————5.2m (height) x 3.8m (width)

Size of the inspected vehicle (length can becustomized)————18m (length) x 2.6m (width) x 4.6m (height)

Size of ground working area———————————not more than 45m (length) x 15m (width), with shielding wall 

Lifting height————————————8m

Supply voltage——————————380+10% VAC three-phase five-wire system, or configured according to"customer equirements

Frequency—————————————50 ± 1HZ

Power————————————————less than 25KW 

Operation lemperature————————- -30C~+50℃ 

Storage Temperature—————————- -30C~+55C

Humidity————————————0%~95%,no condensation 

System boundary dose rate——————≦2.5uSv/h

Minimum number of staff—————————2