EI-UVSS VI100 Small Vehicle Security Inspection System

EI-UVSS VI100 Small Vehicle Security Inspection System

Product Introduction 

EI-UVSS VI100 Small vehicle inspection system using X-ray fluoroscopy scanning imaging technology, ray source selection of electronic  linear gas pedal, X-ray maximum energy 1MeV. The maximum energy of X-rays is 1MeV, which can carry out real-time on-line scanning and imaging inspection of all kinds of small  and form a fine perspective image. The system is widely used in customs, ports,The system is widely used in customs, ports,  transportation and judicial imaging inspection of various types of small vehicles.

Technical Features 

★ Dual-mode design, supporting drag scanning (fine inspection) and non-stop scanning (fast inspection); 

★ Selection of electronic linear gas pedal, strong penetration ability; 

★ Can carry out non-opening inspection for all kinds of carts; 

★ High inspection accuracy and low false alarm rate.

Main technical parameters

Technical indicator——————————Parameter

X-Ray source—————————————1 MeV 

Radiation sources———————————Electronic linear gas pedals 

Scanning mode————————————precise scanning mode and fast scanning mode 

Scanning speed————————————0.2m/s (precise scanning mode); 

                                                                      1.5m/s (fast scanning mode)

Steel penetration———————————The outline of200x200x100mm lead can be seen after thickness ≥ 150mm steel plate   (scanning speed 0.2m /s); 

                                                                     The outline of 200x200x100mm lead can be seen after thickness ≥130mm steel plate (scanning speed 1.5m /s) 

Steel wire detection——————————≤1.5mm in the air(scanning speed 0.2m/s);

                                                                     ≤2.0mm in the air(scanning speed 1.5m/s) 

Penetrating wire detection———————After 20mm steel plate, diameter≤2.5mm steel wire is visible (scanning speed 0.2m/s): 

                                                                     After 20mm steel plate. diameter≤2.5mm steel wire is visible (scanning speed 1.5m/s) 

Contrast sensitivity——————————After 20mm steel plate, thickness≤0.5mm steel sheet is visible (scanningspeed 0.2m/s); 

                                                                    After 20mm steel plate, thickness≤1.0mm steel sheet isvisible (scanning speed 1.5m/s) 

Spatial resolution———————————Line pair diameter≤3mm (scanning speed 0.2m/s); 

                                                                     line pair diameter ≤5mm (scanning speed 1.5m's) 

Material dis crmination—————————Distinguish between organics, inorganics and mixtures, each marked witha specific color

Sca nning equipment aisle size——————3.2 m (width), 3.2 m (Height) 

Maximum size ofinspected vehicle————7 m (Length) x 2.2 m (Width)x 2.8 m (Height) 

Radiation safety area——————————8 m (Length)x 6 m (Vidth) (without radiation shielding wall) 

System boundany dose rate———————≤2.5uSw/h 

Annual effective dose to staff———————≤2mSv 

Annual effective dose to the public—————≤0.2mSv 

Single scanning absorbed dose——————≤10uSv/time 

Electricity capacity ofthe system——————≤20kVA 

Voltage—————————————————380±10%VAC 

Frequency———————————————50±1Hz 

Operating ambient temperature——————-40℃~+50℃ 

Storage ambient temperature———————-50℃~+55℃ 

Relative humidity————————————0%-99%,no condensation 

lmage transformation and processing———scaling, pseudo-color transformation, inverse color function, histogramequalization,   super-enhancement, edge enhancement, suspicious marking and annotation, user-   defined macros, image format comversion 

Image scaling——————————————1-8X 

Image acquisition mod——————————real-time, synchronized 

Intelligent map review function———————with foreign object detection, gun detection, knife detection, pressure tank detection   and other functions